Chinese I want to inquiry Contact Us
Home About Us News Products International Trade Service Contact  
Hot Production: Mobile Crusher Plant Vsi Crusher    
News Center
News Center
News Center  Contact Now     Online Order 
Cone crusher introduce and Cone crusher crushing process

Cone crusher crushing rock function is the same as gyratory crusher, which also uses the mine face between movable cone and fixed cone to crush. Movable cone supported on spherical bearings, and fixed in a hanging vertical axis, vertical axis placed eccentric sleeve, and eccentric sleeve and placed on the thrust bearing, dynamic cone and the vertical axis with the eccentric sleeve driven by the eccentric sleeve and the horizontal axis and the pulley to drive by the bevel gear. The belt is driven by the motor pulley. Vertical axis is fixed into the lower part of the eccentric sleeve, when the eccentric sleeve rotates, to draw a cone axis. So when moving the cone near the fixed cone, the ore is crushed. Case is bolted by the upper and lower parts. There is strong the bolt on the sets of springs, which is to protect the machine from the breaker damaging when the role of the metal or other hard objects falling into the crushing chamber. If there are piece of metal or other hard objects feeding into the crushing chamber together with the ore, fixed cone is lifted so the discharge ports is larger and the mixed can be discharged. Vipeak cone crusher’s size of discharge port is adjusted by hydraulic device.
Ore from the mine mouth to fall into the machine through the allocation of disk, allocated disk installed in the vertical axis side, the vertical axis of rotation, and access to vibration, the ore evenly around the cone. With the hinge rod with a handle and hinges, so that the fixed cone up or down to adjust the width of discharge port. The components are cast steel manufacturing, moving cone and fixed cone face inlaid with manganese steel liner to protect the cone from wear and tear, worn liner can be replaced, replacement, between the liner and poured into the molten cone lead to strong bonding between them. Vipeak short head cone crusher structure is basically the same as cone crusher, the difference only lies in shapes of moving cone and fixed cone. Vipeak short cone crusher movable cone and fixed cone is relatively short, but the parallel between the two cones is relatively long, which makes the mine mouth and the port of discharge is relatively small, so the product can be smaller (5 -10 mm).
Cone crusher production particle size characteristics: granularity of broken product features, the operation of the crusher, selection or further processing, and process design calculations are important. Factors of effecting particle size characteristics Vipeak technical staff said: material nature of the content of fine particles to the compound, crusher types, and operation. Therefore, the user must pay attention to when choosing the correct choice of the model cone breaker, safe operating procedures, which will bring you very good results, but not correct action will bring bad consequences. Therefore, careful consideration must be selected models! If you want to learn more about the cone breaker type, cone breaker technology, cone breaker price and other issues,please contact us:

Related article:How does cone crusher work

Welcome to browse other kind of languages !
Tel(Shanghai): 0086-21-51382188 E-mail:
Tel(Zhengzhou): 0086-371-67771000 E-mail: sitemap stone crusher